National Highway Traffic Safety Administration1997 Cadillac DevilleEquipment › Accessory scissor screw bottle jack lift

This is a copy of an email I sent to cadillac

ODI Happened February 15, 2003Filed February 27, 2003

In the owner's words

This is a copy of an email I sent to cadillac. Cadillac did respond, however, they are not pursuing this issue any further. I had a very disturbing experience this past saturday evening, february 15, 2003. My wife and myself went out for dinner and the right front tire went flat. It was only 15 degrees out and I decided to change the tire myself. I loosened the lug nuts, then using the factory jack, raised the car, took off the flat tire, installed the spare, and hand tightened all the lugs nuts. I then went to lower the jack and as I started turning the bolt to lower the car, the jack broke and the car fell. Luckily I was not under the tire or any other part of the car. When I pulled the jack out from under the car, the sides of the jack tore. It appears that the jack was made out of material about twice the thickness of sheet metal. The jack was not robust enough to handle a 4000 lb. Car. I was parked on a level parking lot when I changed the tire. *jb

An owner's report to NHTSA. NHTSA reads every complaint to decide what to investigate; it doesn't verify them, and a complaint is not a recall.