Campaigns on record across the Porsche 944 (1982–1991), from Transport Canada and, tagged NHTSA, the United States. Pick a model year for the Canadian listing, and check your VIN with Porsche to confirm which apply.
THE PLASTIC COWL COVER WAS NOT SEALED TO THE BODY AT THE BASE OF THE WINDSHIELD. WATER CAN LEAK AND REACH THE WINDSHIELD WIPER MOTOR, CAUSING INTERNAL CORROSION AND FAILURE OF THE WIPER MOTOR.
FAILURE OF THE WIPER MOTOR RESULTS IN REDUCED DRIVER VISIBILITY IN INCLEMENT WEATHER AND COULD RESULT IN AN ACCIDENT.
DEALERS WILL INSTALL A NEW WIPER MOTOR COVER.
94V088000 · 1,178 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 1991 porsche 944 recalls
THE SHORT SECTION OF HIGH PRESSURE FUEL HOSE BETWEEN THE FUEL RAIL AND THE FUEL PRESSURE REGULATOR, WHICH RUNS ALONGSIDE THE INTAKE MANIFOLD, MAY BE SUBJECT TO HARDENING. IN THE EVENT THAT THIS LINE DOES HARDEN, FUEL LEAKS COULD DEVELOP BETWEEN THE HOSE AND METAL PIPE FITTINGS. LEAKING FUEL COULD IGNITE ON THE HOT EXHAUST SYSTEM AND LEAD TO AN ENGINE COMPARTMENT FIRE. CORRECTION: FUEL HOSE WILL BE REPLACED ON 924S, 944 AND 944 TURBO VEHICLES AND THE FUEL HOSE AND FUEL RAIL WILL BE REPLACED ON 944S VEHICLES.
1990051 · 2,527 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 1988 porsche 944 recalls
THE HOSE MATERIAL USED IN THE SHORT SECTION OF THE HIGH PRESSURE FUEL LINE HOSE, BETWEEN THE FUEL RAIL AND FUEL PRESSURE REGULATOR, IS SUBJECT TO HARDENING, AND COULD CAUSE FUEL LEAKS BETWEEN THE HOSE AND THE METAL PIPE FITTINGS.
FUEL LEAKS COULD IGNITE ON THE HOT EXHAUST SYSTEM, OR ANY OTHER SOURCE OF IGNITION, RESULTING IN AN ENGINE COMPARTMENT FIRE.
REPLACE FUEL LINE HOSE WITH HOSES MADE OF IMPROVED MATERIAL.
90V061000 · 53,427 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 1988 porsche 944 recalls
FRONT TRACKING CONTROL ARMS ON THESE VEHICLES BEARING THE IDENTIFICATION CODE "SM" COULD CRACK AND EVENTUALLY BREAK. THE BREAKAGE OF THE FRONT TRACKING CONTROL ARM WHILE DRIVING MAY RESULT IN LOSS OF CONTROL AND A VEHICLE CRASH WITHOUT PRIOR WARNING. CORRECTION: VEHICLES WILL BE INSPECTED AND FRONT TRACKING CONTROL ARMS WITH THE "SM" IDENTIFICATION CODE WILL BE REPLACED.
1989113 · 94 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 1988 porsche 944 recalls
THE ALLOY A-ARMS MAY HAVE A MANUFACTURING CASTING DEFECT AND COULD CRACK AND BREAK AFTER MILEAGE ACCUMULATION.
A-ARM BREAKAGE COULD CAUSE LOSS OF CONTROL WHICH COULDRESULT IN AN ACCIDENT.
REPLACE SUSPECT A-ARMS.
89V133000 · 1,936 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 1988 porsche 944 recalls
THE FUEL RETURN RETURN HOSE BETWEEN THE PRESSURE REGULATOR AND THE FUEL RETURN PIPE MAY BECOME KINKED DUE TO THE INFLUENCE OF ENGINE COMPARTMENT HEAT AND/OR THE ROUTING OF THE HOSE. THIS COULD RESULT IN RESTRICTION AND DAMAGE TO THE RETURN HOSE AND COULD LEAD TO FUEL LEAKAGE AND POSSIBLE ENGINE COMPARTMENT FIRE. CORRECTION: FUEL RETURN HOSE WILL BE REMOVED AND A NEW HOSE AND PROTECTIVE SLEEVE WILL BE INSTALLED.
1986068 · 809 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 1986 porsche 944 recalls
THE PROTECTIVE SLEEVE COVERING OF THE RETURN FUEL HOSE BETWEEN THE PRESSURE REGULATOR AND FUEL RETURN PIPE WAS SHORTENED LEAVING PART OF THE HOSE EXPOSED. IN SOME INSTANCES THIS PART OF THE HOSE BECOMES KINKED DUE TO THE ENGINE COMPARTMENT HEAT AND/OR THE ROUTING OF THE HOSE. CONSEQUENCE OF DEFECT: IF THIS OCCURS IT COULD RESTRICT AND DAMAGE THE RETURN FUEL HOSE WHICH COULD LEAD TO FUEL LEAKAGE AND CAUSE AN ENGINE COMPARTMENT FIRE.
NEW HOSE WILL BE INSTALLED WITH A LONGER PREFORMED SLEEVE DESIGNED TO PREVENT KINKING. THE REPLACEMENT HOSE WILL BE SECURED WITH SCREW TIGHTENED CLAMPS ON EACH END.
86V077000 · 17,717 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 1986 porsche 944 recalls
THE REAR SPRING PLATES (RADIUS ARMS) ON THESE VEHICLES MAY HAVE BEEN IMPROPERLY TEMPERED BY SUPPLIER. IMPROPERLY HARDENED SPRING PLATES COULD CRACK AND POSSIBLY BREAK . THIS COULD AFFECT LATERAL GUIDANCE OF THE CORRESPONDING REAR WHEEL RESULTING IN LOSS OF VEHICLE CONTROL.
1985110 · 109 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 1983 porsche 944 recalls
REAR SPRING PLATES MAY NOT HAVE BEEN TEMPERED AND ARE NOT OF THE PROPER HARDNESS VALUE. CONSEQUENCE OF DEFECT: THE PLATES COULD CRACK AND/OR BREAK, AFFECT LATERAL GUIDANCE OF THE REAR WHEEL, AND RESULT IN LOSS OF CONTROL OF THE CAR WHICH MAY CAUSE AN ACCIDENT.
TEST TO IDENTIFY SPRING PLATES WHICH ARE IMPROPERLY HARDENED AND REPLACE AS NECESSARY.
85V095000 · 4,193 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 1983 porsche 944 recalls
THE FUEL SUPPLY HOSE TO THE PRESSURE DAMPER IN THE ENGINE COMPARTMENT MAY DEVELOP A LEAK BETWEEN THE FLEX HOSE AND THE THREADED CONNECTOR DUE TO IMPROPER CRIMPING OF THE FITTING. THIS WILL CAUSE THE FUEL PRESSURE IN THE INJECTION SYSTEM TO DROP, RESULTING IN ENGINE STALLING. A STALLED VEHICLE COULD POSE A THREAT TO TRAFFIC SAFETY.
1985040 · 195 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 1985 porsche 944 recalls
1–10 of 15
Porsche 944 by year
Related recall checks
Check recalls for specific Porsche 944 model years