Campaigns on record across the Dodge Daytona (1984–1993), from Transport Canada and, tagged NHTSA, the United States. Pick a model year for the Canadian listing, and check your VIN with Dodge to confirm which apply.
FEDERAL MOGUL IS RECALLING 6,903 AFTERMARKET BALL JOINT ASSEMBLIES SHIPPED BETWEEN NOVEMBER 9, 2007 AND MARCH 26, 2008, WHICH MAY HAVE BEEN PACKAGED WITH INCORRECT NUTS. THE PART NUMBERS PACKAGED WITH INCORRECT NUTS ARE: K7147, K7329, K8683, AND 104353. THESE PARTS WERE MADE FOR USE ON THE VARIOUS VEHICLES LISTED ABOVE.
THE NUTS INCLUDED IN THE PACKAGING FOR THESE BALL JOINT ASSEMBLIES ARE MISSING THE INTENDED PREVAILING TORQUE (SELF-LOCKING) FEATURE. IF THE INCORRECT NUT WAS TO BECOME LOOSE, THE JOINING MEMBERS MAY LOOSEN LEADING TO A SEPARATION OF THE BALL JOINT. THIS MAY RESULT IN LOSS OF VEHICLE CONTROL, POSSIBLY RESULTING IN A VEHICLE CRASH.
FEDERAL MOGUL WILL NOTIFY OWNERS AND REPLACE THE PARTS FREE OF CHARGE. THE RECALL BEGAN ON MAY 22, 2008. OWNERS CAN CONTACT FEDERAL MOGUL AT 877-489-6659.
08E033000 · 6,903 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 1990 dodge daytona recalls
INADEQUATE WELD ATTACHMENT OF THE FRONT FRAME RAILS TO THE DASH PANEL MAY RESULT IN CRACKING OF THE DASH PANEL AROUND THE SHOCK TOWER AND FLOOR PAN AREA. THIS MAY COMPROMISE THE VEHICLE'S IMPACT PROTECTION CAPABILITY. CORRECTION: DASH PANEL WILL BE SECURED TO THE FRAME RAILS BY ADDING ADDITIONAL FASTENERS (NUTS AND BOLTS).
1993106 · 1,928 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 1993 dodge daytona recalls
THE WELDING ATTACHMENTS OF THE FRONT FRAME RAILS TO THE FLOOR PAN SHEET METAL MAY NOT BE PROPERLY WELDED.
THE IMPROPERLY WELDED AREAS COULD CAUSE BODY PANELFLEXING AND SHEET METAL CRACKING, POSSIBLY RESULTING IN STRUCTURAL DAMAGE,COMPROMISING THE VEHICLE IMPACT PROTECTION CAPABILITY. THIS COULD INCREASE THELIKELIHOOD OF INJURY TO OCCUPANTS IF THE VEHICLE IS INVOLVED IN A COLLISIONACCIDENT.
SECURE THE FLOOR PAN TO THE FRONT FRAME RAILS BY BOLTING BOTH FRAME RAILS TO THE FLOOR PAN.
93V114000 · 17,000 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 1993 dodge daytona recalls
THE ZINC PLATING OPERATION PERFORMED ON THE UPPER STEERING COLUMN SHAFT COUPLING BOLT CAUSED HYDROGEN EMBRITTLEMENT AND BREAKAGE OF THE BOLT.
FRACTURES OF THE UPPER STEERING COLUMN SHAFT COUPLINGBOLT RESULT IN A LACK OF COUPLING LOAD ON THE SHAFT AND LOSS OF STEERINGCONTROL.
REPLACE THE ZINC PLATED BOLT WITH A PHOSPHATE PLATED BOLT.
92V015000 · 20,000 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 1992 dodge daytona recalls
THE BONDED DISC BRAKE LININGS MAY SEPARATE FROM THE SHOES DUE TO A BONDING DEFICIENCY WHICH MAY ALLOW CORROSION DEGRADATION OF THE BOND ATTACHMENT.
SEPARATION OF THE DISC BRAKE LININGS RESULTS IN ANINCREASE IN STOPPING DISTANCE.
REPLACE THE FRONT AND REAR LININGS ON VEHICLES WITH 15 INCH BRAKES. REPLACE ONLY THE REAR BRAKE LININGS ON VEHICLES WITH 14 INCH BRAKES BECAUSE THE FRONT LININGS ON THESE VEHICLES ARE RIVETED.
92V017000 · 41,000 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 1989 dodge daytona recalls
THE OWNER'S MANUAL INCORRECTLY STATES THAT THE FRONT PASSENGER DOOR CANNOT BE OPENED FROM THE INSIDE IF THE DOOR IS LOCKED UNTIL THE LOCK CONTROL HANDLE HAS BEEN PULLED UP. ON THESE VEHICLES, THE FRONT PASSENGER DOOR CAN BE OPENED BY THE INSIDE DOOR HANDLE EVEN IF THE DOOR IS LOCKED.
THE ERROR IN THE OWNER'S MANUAL MAY LEAD A FRONT SEATPASSENGER TO MISTAKENLY OPEN THE CAR DOOR WHILE THE VEHICLE IS IN MOTION,BELIEVING THE INSIDE DOOR HANDLE WOULD NOT OPEN IF THE DOOR WAS LOCKED. THISCOULD RESULT IN AN INJURY TO THE FRONT SEAT PASSENGER.
NOTIFY THE VEHICLE OWNERS OF THE ERROR IN THE OWNER'S MANUAL AND INFORM THEM OF THE ACTUAL OPERATION OF THE FRONT DOOR LOCK SYSTEM.
92V016000 · 57,000 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 1991 dodge daytona recalls
MISMATCHED PARKING BRAKE CABLE LENGTHS TO THE REAR WHEELS REDUCES BRAKING ABILITY OF ONE OF THE REAR WHEELS, IN VIOLATION OF FMVSS 105.
INSUFFICIENT BRAKING ABLITY COULD RESULT IN INADVERTENTVEHICLE ROLLAWAY WHICH COULD RESULT IN A VEHICLE ACCIDENT.
REPLACE MISMATCHED PARKING BRAKE CABLE WITH ONE OF CORRECT LENGTH.
91V078000 · 90 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 1991 dodge daytona recalls
Certain Daytona and Daytona Shelby vehicles do not comply with CMVSS 110 - tire selection and rims. (incorrect tire placard)
1990140 · 9 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 1991 dodge daytona recalls
INCORRECT TIRE PRESSURE PLACARD WAS INSTALLED ON CARS; DOES NOT COMPLY WITH FMVSS 110.
INSTALL CORRECT PLACARD CONTAINING PROPER PRESSURE INFORMATION.
90V169000 · 300 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 1991 dodge daytona recalls
FRONT DISC BRAKE CALIPER GUIDE PIN BOLTS MAY NOT HAVE BEEN ADEQUATELY TORQUED AND COULD LOOSEN.
THIS COULD CAUSE REDUCED BRAKING EFFECTIVENESS AND COULDRESULT IN AN ACCIDENT.
PROPERLY TORQUE FRONT BRAKE CALIPER GUIDE PIN BOLTS TO 250 POUNDS.
90V162000 · 18,000 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 1991 dodge daytona recalls
1–10 of 23
Dodge Daytona by year
Related recall checks
Check recalls for specific Dodge Daytona model years