Campaigns on record across the BMW 1-Series (2004–2016), from Transport Canada and, tagged NHTSA, the United States. Pick a model year for the Canadian listing, and check your VIN with BMW to confirm which apply.
Issue: On certain vehicles, the tire and loading information label does not list that there is no spare tire in both official languages. The label reads as "NONE" when it should read as "NONE / AUCUN". Canadian regulations require the information to be listed on the label in both English and French. Safety Risk: This error does not affect vehicle safety. Corrective Actions: This is not a recall. The company has corrected the tire and loading information label for all new vehicles.
2024544 · 587,250 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 2013 bmw 1 series recalls
Issue: This recall applies to vehicles that may be equipped with a replacement sport or M-sport steering wheel that has a Takata airbag. Long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the driver-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Safety Risk: If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective Actions: BMW will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, replace the driver-front airbag module. To learn if your vehicle is affected by this recall, owners may: • Visit <a href= https://www.bmw.ca/en/ssl/VehicleRecall.html> https://www.bmw.ca/en/ssl/VehicleRecall.html</a> • Contact your preferred or local BMW Retailer • Call BMW Customer Relations Recall Services at 1-855-217-3002
2024392 · 44,131 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 2005 bmw 1 series recalls
Issue: On certain vehicles, the variable camshaft timing (VANOS) adjustment unit housing bolts could loosen or break. As a result, the camshaft could become incorrectly adjusted and cause the engine to enter a reduced power mode (limp mode) or to stall while driving. Safety Risk: A sudden loss of engine power could increase the risk of a crash. Corrective Actions: BMW will notify owners by mail and advise you to take your vehicle to a dealership to replace the VANOS bolts.
2023568 · 21,475 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 2012 bmw 1 series recalls
BMW of North America, LLC (BMW) is recalling certain 2010-2012 1 Series Coupe, 1 Series Convertible, 3 Series Sedan, 3 Series Convertible, 2010-2011 3 Series Sportswagon, 3 Series Coupe, 5 Series Sedan, X3 xDrive 28i, X3 xDrive 30i, X5 xDrive30i, and Z4 sDrive30i vehicles. The aluminum bolts that secure the housing for the variable camshaft timing adjustment (VANOS) unit can loosen over time and possibly break.
Loose or broken VANOS unit bolts can result in an engine stall, increasing the risk of a crash.
Dealers will replace the four VANOS bolts, free of charge. Interim letters notifying owners of the safety risk are expected to be mailed December 18, 2023. Owner notification letters were mailed June 19, 2024. Owners may contact BMW customer service at 1-800-525-7417.
23V707000 · 157,796 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 2012 bmw 1 series recalls
Issue: On certain vehicles equipped with an N52 or N52K 6-cylinder engine, a manufacturing problem could cause the PCV valve heater (blow-by heater) to short circuit and overheat. Note: This replaces Transport Canada recalls 2017-470 and 2019-170. Only vehicles equipped with an N52 or N52K engine require this repair. Safety Risk: An overheated engine PCV valve heater could create the risk of a fire, even while the vehicle is parked and turned off. Corrective Actions: BMW will notify owners by mail and instruct you to take your vehicle to a dealer to install a wire harness repair kit. BMW recommends that you should park your vehicle outdoors until the recall repairs have been completed.
2022095 · 98,111 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 2013 bmw 1 series recalls
Issue: This recall is for certain vehicles that had an airbag inflator replaced as a part of an earlier recall campaign. This recall provides a final repair. Long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the driver-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Safety Risk: If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective Actions: Owners will be notified by mail and instructed to take their vehicle to a dealer to inspect the driver-front airbag inflator. The driver-front airbag module or inflator will be replaced as necessary. Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.
2020008 · 47 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 2013 bmw 1 series recalls
Issue: On certain vehicles, the connector for the blower motor regulator may corrode. If this happens, the wiring could overheat and melt. Potential warnings include a blower motor that does not work, a burning smell, or smoke in the cabin. Safety Risk: Wiring that overheats could create a risk of a fire. Corrective Actions: BMW will notify owners by mail and instruct them to take their vehicle to a dealer to replace the blower regulator wiring harness. Other components will be inspected for damage, and replaced as necessary.
2019384 · 8,457 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 2012 bmw 1 series recalls
This recall was replaced by Transport Canada Recall No. 2021-711. On certain vehicles, the cooler for Exhaust Gas Recirculation (EGR) module may develop an internal leak and coolant could mix with diesel engine soot/sediment. In rare circumstances, this condition could result in smouldering particles and lead to the melting of the intake manifold, increasing the risk of a fire causing injury and/or damage to property. Correction: Dealers will inspect the EGR cooler, and if necessary, replace it. If it is determined that the EGR cooler has leaked internally, the intake manifold will also be replaced. The EGR pipe connecting the cooler to the manifold will be cleaned. Note: An operator may be alerted to this condition by one or more of the following symptoms: A warning symbol in the instrument cluster displaying a loss of engine coolant, a reduction in engine power, an unpleasant odour (exhaust gas), an unusual noise from the engine compartment, and/or smoke from the engine compartment.
2018587 · 10,368 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 2016 bmw 1 series recalls
On certain vehicles equipped with the N52 6-cylinder engine, an electrical short could occur in the PCV valve heater due to manufacturing irregularities. If this occurs, the surrounding plastics could overheat, melt and potentially cause a fire, which could increase the risk of injury and/or damage to property. Correction: Dealers will replace the PCV valve heater.
2017470 · 79,616 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 2011 bmw 1 series recalls
On certain vehicles, the rivet connections for the constant velocity (CV) joint of the rear driveshaft may have insufficient durability. Over time, this could cause the CV joint to break, resulting in a loss of propulsion which could increase the risk of a crash causing injury and/or property damage. Correction: Dealers will replace the CV joint. Note: This recall supersedes recall 2017-049
2017242 · 869 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 2012 bmw 1 series recalls
1–10 of 20
BMW 1-Series by year
Related recall checks
Check recalls for specific BMW 1-Series model years