Campaigns on record across Mazda vehicles from Transport Canada and, tagged NHTSA, the United States. The same defect is often filed with both, so this is not a count of distinct problems. Pick a model year for the Canadian listing, and check your VIN with Mazda to confirm which apply.
Issue: On certain vehicles, the wheel hub nuts, outer tie rod nuts, front lower ball joint nuts, upper control link nuts and/or axle bracket bolts may not have been tightened properly. As a result, the fasteners could loosen and detach. If this happens, there could be a loss of power to the wheels, a loss of control and/or parts could separate from the vehicle. Note: This problem could cause unusual noises from the front of the vehicle when steering and/or driving over bumps. Safety Risk: A loss of power to the wheels and/or a loss of control could increase the risk of a crash. Additionally, parts that separate from the vehicle could create a road hazard for others and increase the risk of a crash. Corrective Actions: To reduce the safety risk, Mazda advises you to visually inspect the alignment of the front wheels before driving until the recall repairs have been completed. Mazda will notify owners by mail and advise you to take your vehicle to a dealership to inspect and tighten or replace the fasteners, as necessary.
2025592 · 98 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 2025 mazda cx 50 recalls
Mazda North American Operations is recalling certain 2025 CX-50 and CX-50 Hybrid vehicles. The front suspension fastener bolts may not be tightened properly, which can result in suspension component and/or wheel detachment.
Wheel or suspension component detachment can cause a loss of vehicle control and a loss of drive power, increasing the risk of a crash.
Dealers will inspect the front suspension fastener bolts and, if necessary, replace and tighten them, free of charge. Owner notification letters were mailed December 10, 2025. Owners may contact Mazda customer service at 1-800-222-5500 Option 6. The manufacturer's number for this recall is 7925J. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov beginning November 3, 2025.
25V737000 · 1,007 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 2025 mazda cx 50 hybrid recalls
Issue: On certain vehicles, an incorrect fuel level may be displayed on the instrument cluster. As a result, the driver may be unaware of how much fuel is in the tank, and the vehicle could run out of fuel and stall. Safety Risk: A sudden loss of engine power could increase the risk of a crash. Corrective Actions: To reduce the safety risk, Mazda advises that you should refuel before the fuel gauge reaches ¼ level until the recall repairs have been completed. Mazda will notify owners by mail and advise you to take your vehicle to a dealer to update the body control module software.
2025447 · 14,350 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 2025 mazda cx 70 recalls
Mazda North American Operations (Mazda) is recalling certain 2024-2025 CX-90 and 2025 CX-70 mild hybrid electric vehicles (MHEV). The fuel gauge in the instrument cluster may display an inaccurate fuel reading.
An inaccurate fuel gauge may result in the vehicle unexpectedly running out of fuel and stalling, increasing the risk of a crash.
Dealers will update the body control module (BCM) software, free of charge. Owner notification letters were mailed October 24, 2025. Owners may contact Mazda customer service at 1-800-222-5500 Option 6. The manufacturer's number for this recall is 78251. The information in your report suggests that Mazda may have been aware of this issue more than five business days before filing a report with NHTSA. Please be reminded that under Federal law, this agency is to be notified of all safety defect and/or noncompliance decisions within five business days. 49 CFR 573.6 Significant civil penalties can be assessed for this violation.
25V568000 · 104,854 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 2025 mazda cx 70 recalls
Mazda North American Operations (Mazda) is recalling certain 2025 CX-50 Hybrid vehicles. The transmission gear shifter can be moved from Neutral to Drive without pressing the brake pedal.
Shifting into gear without the brake pedal depressed can result in unexpected vehicle movement, increasing the risk of a crash.
Dealers will replace the Engine Control Module (ECM) and reprogram the Hybrid Control Unit (HCU) and Power Control Unit (PCU), free of charge. Interim owner notification letters were mailed August 15, 2025. A second notice will be sent once the remedy becomes available, anticipated late summer 2025. Owners may contact Mazda customer service at 1-800-222-5500 Option 6. The manufacturer's number for this recall is 7725F.
25V418000 · 22 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 2025 mazda cx 50 recalls
Mazda North American Operations (Mazda) is recalling certain CX-50 Hybrid and CX-50 vehicles. Incorrectly configured module software may cause the air bag to deploy improperly.
An air bag that deploys improperly increases the risk of injury during a crash.
Dealers will update the module software, free of charge. Owner notifications will not be mailed due to all vehicles being under Mazda dealer control. Owners may contact Mazda customer service at 1-800-222-5500 Option 6. The manufacturer's number for this recall is 7625F.
25V413000 · 2 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 2025 mazda cx 50 recalls
Issue: On certain vehicles, if the ignition switch is left in the "ON" position for too long, it could drain the battery. As a result, when the battery is recharged, and the vehicle is restarted, the airbag warning light will turn on and the airbags won't work in a crash. Safety Risk: Airbags that don't work properly could increase the risk of injury in a crash. Corrective Actions: Mazda will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, as necessary, update the vehicle software or replace the airbag sensor unit.
2025294 · 34,650 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 2025 mazda cx 30 recalls
Mazda North American Operations is recalling certain 2024-2025 Mazda3 and CX30 vehicles. The Sophisticated Air Bag Sensor (SAS) units may set an error code and deactivate the air bags, due to a low battery condition.
Air bags that do not deploy in the event of a crash increase the risk of injury.
Dealers will reprogram the SAS unit with improved software or replace the unit, free of charge. Owner notification letters were mailed July 24, 2025. Mazda's number for this recall is 7525E.
25V357000 · 171,412 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 2025 mazda cx 30 recalls
Issue: Under certain conditions, a software problem in the dynamic stability control (DSC) unit could cause the traction control system (TCS) / DSC indicator light not to turn on. As a result, the vehicles may not meet certain requirements of Canadian regulations. Safety Risk: An indicator that doesn't turn on could cause you not to be aware of a problem with the TCS/DSC system. This could increase the risk of a crash. Corrective Actions: Mazda will notify owners by mail and advise you to take your vehicle to a dealership to replace the DSC unit with an improved part.
2025275 · 1,289 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 2025 mazda mx 5 miata recalls
Mazda North American Operations (Mazda) is recalling certain 2024-2025 Mazda MX-5 vehicles. The Traction Control System (TCS) and Dynamic Stability Control (DSC) indicator light may fail to illuminate as intended due to a software error. As such, these vehicles fail to conform to Federal Motor Vehicle Safety Standard number 126, "Electronic Stability Control Systems."
An indicator light that does not illuminate may fail to warn the driver of a TCS or DSC system issue, increasing the risk of a crash.
Dealers will replace the DSC unit, free of charge. Owner notification letters were mailed July 18, 2025. Owners may contact Mazda customer service at 1-800-222-5500 Option 6. Mazda's number for this recall is 7425E.
25V336000 · 12,244 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 2025 mazda mx 5 recalls
1–10 of 439