Campaigns on record across the Dodge W200 (1966–1988), from Transport Canada and, tagged NHTSA, the United States. Pick a model year for the Canadian listing, and check your VIN with Dodge to confirm which apply.
AUTOMATIC TRANSMISSION MAY CONTAIN A PARK SPRAG ROD ASSEMBLY THAT MAY STICK IN THE TOOTH BUTT UNENGAGED POSITION.
THIS CONDITION COULD ALLOW THE VEHICLE TO ROLL WITH THEGEAR SHIFT LEVER IN PARK POSITION.
ALL INVOLVED VEHICLES WILL HAVE THE PARK SPRAG ROD ASSEMBLIES REPLACED.
87V194000 · 3,500 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 1988 dodge w200 recalls
On certain vehicels, arc welds securing the wheel centre sections to the rims may fatigue crack. If the cracks propogate road wheel failure could occur.
1984059 · 10 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 1984 dodge w200 recalls
DUE TO IMPROPER MATERIAL CONSTRUCTION THE HYDRO-BOOST FLUID RETURN HOSE MAY NOT BE CAPABLE OF WITHSTANDING THE TEMPERATURES AND/OR PRESSURES EXPERIENCED WITH THE HYDRO-BOOST SYSTEM. ALSO, THE HYDRO-BOOST FLUID HIGH PRESSURE HOSE ASSEMBLY MAY HAVE BEEN MISLOCATED, ALLOWING THE ASSEMBLY TO CONTACT THE FRAME SIDE RAIL. ABRASION RESULTING FROM CONTINUED CONTACT ALONG WITH IMPROPER MATERIAL CONSTRUCTION MAY CAUSE PRESSURE HOSE FAILURE. EITHER OF THESE CONDITIONS MAY CAUSE HYDRO-BOOST FLUID LEAKAGE, RESULTING IN THE LOSS OF POWER ASSIST FOR THE STEERING AND BRAKING SYSTEMS. COMPLETE LOSS OF STEERING OR BRAKING WILL NOT OCCUR SINCE BOTH SYSTEMS WOULD REVERT TO MANUAL OPERATION.
THE DEALER WILL INSTALL A HYDRO-BOOST FLUID RETURN HOSE CONSTRUCTED FORM THE PROPER MATERIAL, POSITIONING THE HOSE ASSEMBLY TO ENSURE ADEQUATE CLEARANCE BETWEEN IT AND THE FRAME SIDE RAIL.
78V188000 · 1,400 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 1978 dodge w200 recalls
On certain vehicles, the "hydroboost" hydraulic system high pressure hose assembly may be improperly routed and can contact the frame side rail resulting in a leak in the hose assembly. This could result in a loss of power assist to the steering and braking systems.
1978042 · 224 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 1978 dodge w200 recalls
IMPROPER ROUTING OF THE "HYDROBOOST" HYDRAULIC SYSTEM HIGH PRESSURE HOSE ASSEMBLY COULD ALLOW A TUBULAR SECTION TO CONTACT THE FRAME SIDE RAIL. ABRASION FROM THE CONTACT COULD RESULT, CAUSING A LEAK IN THE HOSE ASSEMBLY.
THE DEALER WILL REROUTE "HYDROBOOST" HIGH PRESSURE HOSE ASSEMBLIES AND ANY DAMAGED HOSES WILL BE REPLACED.
78V141000 · 1,400 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 1978 dodge w200 recalls
On certain vehicles, the steering intermediate shaft pot coupling may have an oversized serration diameter in the attachment area of the steering gear shaft or steering column. The attachment may loosen resulting in steering freeplay with a possible loss of steering control.
1977170 · 454 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 1978 dodge w200 recalls
On certain vehicles, the in-cab fuel tank vent could become blocked leading to excessive internal pressure and cracking of the tank. The cracked fuel tank could allow gasoline and gasoline vapour into the cab creating a fire hazard.
1977169 · 3,416 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 1978 dodge w200 recalls
AN INTERMEDIATE STEERING SHAFT CONTAINING A MISMATCHED POT COUPLING ASSEMBLY MAY HAVE BEEN INSTALLED ON THE INVOLVED VEHICLES. THIS COUPLING MAY HAVE AN OVERSIZED SERRATION DIAMETER. AN OVERSIZED SERRATION COULD PREVENT THE COUPLING FROM ADEQUATELY TIGHTENING ONTO THE GEAR OR SHAFT SPLINES.
THE DEALER WILL INSPECT AND, IF NECESSARY, INSTALL A REPLACEMENT SHAFT COUPLING.
78V038000 · 9,000 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 1978 dodge w200 recalls
DEALER WILL INSPECT THE FUEL TANK VENT SYSTEMS FOR BLOCKAGE AND CORRECT, IF NECESSARY. FUEL TANKS WILL BE INSPECTED FOR CRACKING OF THE FRONT PANEL AND REPLACED, IF NECESSARY.
78V036000 · 20,000 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 1978 dodge w200 recalls
THE FUEL TUBES (FUEL TANK TO PUMP) ON THE INVOLVED VEHICLES MAY BE ROUTED SUCH THAT TUBE TO UNDERBODY REINFORCEMENT FLANGE INTERFERENCE MAY RESULT DURING VEHICLE OPERATION. TUBE ABRASION CAUSED BY SUCH INTERFERENCE MAY RESULT IN FUEL LEAKAGE.
DEALER WILL REROUTE THE FUEL TUBE OR INSTALL A NEW FUEL TUBE, IF DAMAGED, WITHOUT CHARGE TO OWNER.
77V212000 · 24,000 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 1978 dodge w200 recalls
1–10 of 26