Campaigns on record across the Chevrolet B6p042 (1982–1990), from Transport Canada and, tagged NHTSA, the United States. Pick a model year for the Canadian listing, and check your VIN with Chevrolet to confirm which apply.
FUEL RETURN HOSES MAY BREAK AT EITHER CRIMPED COUPLING, CAUSING A LEAKAGE OF FUEL.
IN THE EVENT OF A FUEL RETURN LINE SEPARATION, A FUELLEAK OCCURRING IN THE PRESENCE OF AN IGNITION SOURCE COULD CAUSE A FIRE.
INSTALL A PROPERLY CRIMPED FUEL RETURN HOSE.
90V146000 · 30,640 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 1990 chevrolet b6p042 recalls
A CRACK MAY DEVELOP ADJACENT TO THE FUEL TANK SEAM WELD ATTACHING THE TANK END CAP.
THIS COULD RESULT IN A LEAK OR DRIPPING FROM THE FUELTANK WITH POTENTIAL FIRE HAZZARD.
INSTALL LIMITER CUSHIONS ON THE TANK SUPPORT BRACKETS OR REPLACE TANK, IF NECESSARY.
89V071000 · 21,558 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 1989 chevrolet b6p042 recalls
MELTING OF THE AIR BRAKE LINES CAN OCCUR WHERE THE AIR LINES ROUTE UNDER THE LEFT HAND FRAME RAIL NEAR THE EXHAUST PIPE.
THIS COULD RESULT IN PARTIAL OR TOTAL LOSS OF SERVICEBRAKES WITHOUT WARNING, WHICH COULD LEAD TO A VEHICLE CRASH.
REROUTE AIR LINE HARNESS AWAY FROM THE EXHAUST SYSTEM; REPLACE HARNESS IF HEAT DETERIORATION HAS OCCURED.
88V137000 · 1,503 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 1988 chevrolet b6p042 recalls
SEVERE BRAKE CHATTER MAY CAUSE THE BRAKE CHAMBER MOUNTING BRACKETS ON EITHER SIDE TO DEVELOP CRACKS IN THE WELD AREA WHERE THE S CAM SHAFT TUBE ATTACHES TO THE CHAMBER SUPPORT SECTION.
BRACKETS CAN BREAK, RESULTING IN LOSS OF BRAKING ABILITYAT THAT FRONT WHEEL, AND POSSIBLY RESTRICTED STEERING, WHICH COULD LEAD TO AVEHICLE CRASH WITHOUT PRIOR WARNING.
AS NECESSARY, INSTALL NEW REINFORCED FRONT BRAKE CHAMBER MOUNTING BRACKETS AND INSTALL A FRONT BRAKE LIMITING VALVE ON VEHICLES WITHOUT ONE.
87V121000 · 7,870 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 1987 chevrolet b6p042 recalls
SEVERE BRAKE CHATTER MAY CAUSE THE BRAKE CHAMBER MOUNTING BRACKETS ON EITHER SIDE TO DEVELOP CRACKS IN THE WELD AREA WHERE THE S-CAM SHAFT TUBE ATTACHES TO THE CHAMBER SUPPORT SECTION. CONSEQUENCE OF DEFECT: BRACKETS CAN BREAK, RESULTING IN LOSS OF BRAKING ABILITY AT THE FRONT WHEEL, AND POSSIBLY RESTRICT STEERING, WHICH COULD LEAD TO A VEHICLE CRASH WITHOUT PRIOR WARNING.
AS NECESSARY, REPLACE FRONT BRAKE CHAMBER MOUNTING BRACKETS AND INSTALL A FRONT BRAKE LIMITING VALVE.
86V086000 · 4,299 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 1986 chevrolet b6p042 recalls
VEHICLES HAVE A PRIMARY AND A RESERVE BRAKING SYSTEM. IF THE PRIMARY BRAKE SYSTEM BOOSTER FAILS, UNDER SOME CIRCUMSTANCES THE RESERVE SYSTEM MAY ALSO MALFUNCTION AND BRAKING ABILITY WILL BE IMPAIRED.
DEALER WILL INSTALL A NEW RESERVE BRAKE CONTROL MODULE AT NO COST TO OWNER.
84V134000 · 1,436 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 1984 chevrolet b6p042 recalls
Chevrolet B6p042 by year
Related recall checks
Check recalls for specific Chevrolet B6p042 model years