Campaigns on record across the BMW R-100-Rs (1977–1989), from Transport Canada and, tagged NHTSA, the United States. Pick a model year for the Canadian listing, and check your VIN with BMW to confirm which apply.
On certain motorcycles, the front brake hydraulic line may rub against the fuel tank or speedometer cable. This may result in wearing of the brake line with the possibility of a brake fluid leak. This would impair the performance of the front brake. Correction: The brake line will be inspected and replaced if necessary. In addition, a protective sleeve and an additional clamp will be installed.
1991113 · 72 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 1988 bmw r100rs recalls
FRONT BRAKE HYDRAULIC LINE MAY CONTACT AND RUB AGAINST FUEL TANK OR SPEEDOMETER CABLE RESULTING IN SCUFFING AND SUBSEQUENT WEARING ON BRAKE LINES OUTER SURFACE WHICH COULD CAUSE A HYDRAULIC FLUID LEAK. CONSEQUENCE OF DEFECT: HYDRAULIC FLUID LEAK DUE TO THE DAMAGED LINES IMPAIRS BRAKE PERFORMANCE.
A SPIRAL HOSE TO PROTECT THE BRAKE LINE FROM CONTACT WILL BE INSTALLED, AS WELL AS A HOSE CLAMP AND SUPPORT, SO BRAKE LINE WILL NOT CHANGE.
91V107000 · 1,122 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 1988 bmw r100rs recalls
On certain motorcycles, the contacting surfaces which activate the front and rear brake light switches may become misaligned. Misalignment of either of these surfaces could cause that brake light switch to fail prematurely. If this should occur, the brake light would not function for that particular brake. This could, depending on operating conditions, result in a crash with another vehicle or vehicles. Correction: Front and brake lever will be modified, a cap will be placed on the rear brake stop bolt and the front and rear brake light switches will be replaced with a newer switch if the vehicle is not already so equipped.
1989026 · 266 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 1989 bmw r100rs recalls
GAS TANK FILLER CAP PRESSURE RELIEF VALVE MAY CAUSE EXCESSIVE PRESSURE TO BUILD UP IN THE GAS TANK. THIS MAY CAUSE ENGINE FLOODING AND STALLING.
1977040 · 510 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 1977 bmw r100rs recalls
POSSIBILITY THAT THREE GEARS IN THE TRANSMISSION HAVE BEEN IMPROPERLY HARDENED. DEFECT CAN CAUSE THE GEAR TEETH TO WEAR QUICKLY OR BREAK OFF CAUSING LOCK-UP OF THE TRANSMISSION. R60/7 - 6100001 TO 0068 R75/7 - 6120001 TO 0125 R100/7 - 6140001 TO 0083 R100S - 6160001 TO 0334 R100RS - 6180001 TO 0083
1976118 · 60 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 1977 bmw r100rs recalls
76V164000 · 520 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 1977 bmw r100rs recalls
BMW R-100-Rs by year
Related recall checks
Check recalls for specific BMW R-100-Rs model years