Campaigns on record across the Mazda Mazda2 (2007–2021), from Transport Canada and, tagged NHTSA, the United States. Pick a model year for the Canadian listing, and check your VIN with Mazda to confirm which apply.
Mazda North American Operations (Mazda) is recalling certain 2020-2021 Mazda2 vehicles. The headlights are missing adjustment prevention caps, which can allow the headlights to be improperly adjusted. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 108, "Lamps, Reflective Devices, and Associated Equipment."
Improperly adjusted headlights can reduce visibility, increasing the risk of a crash.
Dealers will install the missing adjustment prevention caps, free of charge. Owner notification letters were mailed December 28, 2022. Owners in Puerto Rico may contact Mazda customer service at (787) 620-7546. Owners in the United States may contact Mazda customer service at 1-800-222-5500 Option 6. Mazda's number for this recall is 5622K.
22V885000 · 226 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 2021 mazda mazda2 recalls
Mazda North American Operations (Mazda) is recalling certain 2018 Mazda3, Mazda6, 2019 CX-3, 2018-2019 MX-5, CX-5, CX-9, and 2019-2020 Mazda2 vehicles. The impeller inside the low-pressure fuel pump may crack and deform, potentially causing the fuel pump to fail.
Fuel pump failure may cause an engine stall, increasing the risk of a crash.
Dealers will replace the fuel pumps, free of charge. Owner notification letters were mailed July 18, 2022. Owners may contact Mazda customer service at 1-800-222-5500 Option 4. Mazda's number for this recall is 5321K.
21V875000 · 121,038 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 2020 mazda mazda2 recalls
Certain vehicles may have an incorrect compliance label that does not meet the requirements of the Motor Vehicle Safety Regulations. The vehicle’s compliance label was misprinted with an incorrect manufacturing date of "12/99". Correction: Dealers will replace the compliance label with a corrected one.
2017120 · 39 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 2016 mazda mazda2 recalls
On certain vehicles, the push nuts and/or the lifter link which adjusts the height of the driver seat could be of insufficient strength and could become broken or detach from the seat frame. If this occurs, the seat height and inclination position would change rapidly, which could increase the risk of a crash causing injury and/or damage to property. Correction: Dealers will inspect the condition of the driver's seat lifter link. If no cracks are detected, a reinforcement bracket will be added to the lifter links, and the number of push nuts will be increased to two per seat lifter link. If any cracks are detected, dealers will replace the entire seat adjuster unit with a modified part.
2017073 · 86,733 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 2011 mazda mazda2 recalls
Mazda North American Operations (Mazda) is recalling certain 2011 Mazda2 and 2010-2011 Mazda3 and Mazdaspeed3 vehicles equipped with a manual seat lifter. In the affected vehicles, the seat height adjustment lifter links may break or detach from the seat frame and the seat angle may incline causing the driver to not be able to maintain an appropriate driving position.
If the driver cannot maintain an appropriate driving position, there is an increased risk of a crash.
Mazda will notify owners, and dealers will inspect the seat lifter links and install a reinforcement bracket to the lifter links, or replace the entire seat adjuster unit, free of charge. The recall began April 7, 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 0917B.
17V082000 · 173,859 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 2011 mazda mazda2 recalls
Mazda North American Operations (Mazda) is recalling certain model year 2016 CX-3 vehicles manufactured June 1, 2015, to December 2, 2015, 2013-2014 Mazda2 vehicles manufactured July 3, 2013, to August 8, 2014, 2014-2016 CX-5 vehicles manufactured January 19, 2013, to December 2, 2015, and 2013-2015 CX-9 vehicles manufactured December 6, 2012, to July 31, 2015. The lower mounting nuts and bolts that attach the front strut assembly to the steering knuckle may loosen, allowing the steering knuckle to separate.
If the steering knuckle separates from the strut assembly, it can cause a loss of steering control, increasing the risk of a crash.
Mazda will notify owners, and dealers will inspect the lower mounting nuts and bolts that secure the front strut assembly to the steering knuckle. If the bolts are loose, they will be replaced and then correctly tightened, free of charge. The recall is expected to begin May 20, 2016. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 9316D.
16V203000 · 578 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 2014 mazda mazda2 recalls
On certain vehicles, the nut and bolt holding the strut assembly to the knuckle may not have been tightened properly during the manufacturing process. Over time, this could cause the strut assembly to separate from the knuckle, resulting in a loss of steering control which would increase the risk of a crash causing injury and/or damage to property. Correction : Dealers will inspect and replace the nut and bolt holding the strut assembly to the knuckle if found loose.
2016152 · 220 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 2013 mazda mazda2 recalls
Mazda Mazda2 by year
Related recall checks
Check recalls for specific Mazda Mazda2 model years