Campaigns on record across the Dodge St-Regis (1979–1981), from Transport Canada and, tagged NHTSA, the United States. Pick a model year for the Canadian listing, and check your VIN with Dodge to confirm which apply.
AUTOMATIC SPEED CONTROL SWITCHES COULD STICK IN THE RESUME POSITION RESULTING IN THE SPEED CONTROL NOT DEACTIVATING WHEN THE BRAKES ARE APPLIED.
1981101 · 16,753 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 1981 dodge st regis recalls
THE AUTOMATIC SPEED CONTROL SWITCH MAY STICK IN THE "RESUME" POSITION RESTRICTING RETURN MOVEMENT. THIS WILL NOT ALLOW THE NORMAL BRAKE PEDAL OPERATION TO DEACTIVATE THE SYSTEM.
THE SHIELD PORTION OF THE "RESUME" SLIDE LEVER IN THE SPEED CONTROL UNIT WILL BE REPLACED WITHOUT CHARGE.
81V111000 · 150,000 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 1981 dodge st regis recalls
ENGINE MAY LOSE POWER OR STALL DUE TO CARBURETOR FLOODING. THIS IS CAUSED BY A POOR ELECTRICAL GROUND ON THE CARBURETOR FUEL BOWL VENT SOLENOID. VEHICLES MAY ALSO HAVE DRIVEABILITY PROBLEMS WHILE THE ENGINE IS WARMING UP IN COLD WEATHER. THESE PROBLEMS INCLUDE ENGINE MISSING, SAGS, AND HESITATION. THIS IS CAUSED BY A STICKING CARBURETOR OXYGEN FEEDBACK SOLENOID.
DEALER WILL INSPECT CARBURETOR AND IF NECESSARY, THE BOWL VENT SOLENOID WILL BE REPAIRED BY RESOLDERING (RECONNECTING) THE EXTERNAL ELECTRICAL CONNECTION FREE OF CHARGE. IF APPLICABLE, THE OXYGEN FEEDBACK SENSOR WILL BE REPLACED.
81V055000 · 30,000 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 1981 dodge st regis recalls
1980 VEHICLES EQUIPPED WITH CANADIAN SPECIFICATION 318 C.I.D. - 2 BARREL CARBURETOR CATALYST ENGINES. VEHICLES ARE EQUIPPED WITH AN UNDERHOOD EMISSION CONTROL LABEL PRINTED WITH AN INCORRECT PROPANE IDLE SPEED. THIS INCORRECT INFORMATION MAY CAUSE THE ENGINE TO EMIT EXHAUST GAS POLLUTANTS IN EXCESS OF LEVELS REQUIRED BY CANADA MOTOR VEHICLE SAFETY STANDARD 1103 - EXHAUST EMISSIONS.
1980118 · 15,902 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 1980 dodge st regis recalls
THE INVOLVED VEHICLES MAY HAVE BEEN ASSEMBLED WITH AN OVERSIZED RIGHT FRONT WHEEL BEARING CUP WHICH ALSO PREVENTS THE PLANT LUBRICATING EQUIPMENT FROM CYCLING TO LUBRICATE BOTH THE INNER AND OUTER WHEEL BEARINGS. THE RESULTANT BEARING LOOSENESS AND/OR THE LACK OF LUBRICATION MAY CAUSE BEARING FAILURE AND, POSSIBLY, WHEEL SPINDLE DAMAGE.
DEALERS WILL REPLACE THE INNER AND OUTER RIGHT FRONT WHEEL BEARINGS AND BEARING CUPS ON ALL INVOLVED VEHICLES AT NO COST TO OWNERS.
79V043000 · 90 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 1979 dodge st regis recalls
Dodge St-Regis by year
Related recall checks
Check recalls for specific Dodge St-Regis model years