Campaigns on record across the Dodge 600 (1981–1988), from Transport Canada and, tagged NHTSA, the United States. Pick a model year for the Canadian listing, and check your VIN with Dodge to confirm which apply.
FEDERAL MOGUL IS RECALLING 6,903 AFTERMARKET BALL JOINT ASSEMBLIES SHIPPED BETWEEN NOVEMBER 9, 2007 AND MARCH 26, 2008, WHICH MAY HAVE BEEN PACKAGED WITH INCORRECT NUTS. THE PART NUMBERS PACKAGED WITH INCORRECT NUTS ARE: K7147, K7329, K8683, AND 104353. THESE PARTS WERE MADE FOR USE ON THE VARIOUS VEHICLES LISTED ABOVE.
THE NUTS INCLUDED IN THE PACKAGING FOR THESE BALL JOINT ASSEMBLIES ARE MISSING THE INTENDED PREVAILING TORQUE (SELF-LOCKING) FEATURE. IF THE INCORRECT NUT WAS TO BECOME LOOSE, THE JOINING MEMBERS MAY LOOSEN LEADING TO A SEPARATION OF THE BALL JOINT. THIS MAY RESULT IN LOSS OF VEHICLE CONTROL, POSSIBLY RESULTING IN A VEHICLE CRASH.
FEDERAL MOGUL WILL NOTIFY OWNERS AND REPLACE THE PARTS FREE OF CHARGE. THE RECALL BEGAN ON MAY 22, 2008. OWNERS CAN CONTACT FEDERAL MOGUL AT 877-489-6659.
08E033000 · 6,903 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 1988 dodge 600 recalls
ON VEHICLES WITH POWER ADJUSTED BUCKET SEATS, THE DRIVER'S SEAT FRAME MAY FAIL AT ONE OF ITS FOUR ATTACHMENTS. THIS CAN RESULT IN FORE/AFT OR LATERAL MOVEMENT OF THE SEAT. THIS COULD CAUSE LOSS OF VEHICLE CONTROL AND A POSSIBLE VEHICLE CRASH. CORRECTION: THE DRIVER'S SEAT FRAME WILL BE REPLACED WITH A STRENGTHENED VERSION. ALSO, THE POWER ADJUSTER CROSSMEMBER WILL BE REINFORCED.
1989096 · 4,432 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 1985 dodge 600 recalls
FRONT SUSPENSION CROSSMEMBER MAY CORRODE AND FAIL AT LOWER CONTROL ARM REAR PIVOT MOUNTS IF OPERATED WHERE SALT IS USED TO AID IN SNOW REMOVAL.
CONTROL ARM COULD DETACH FROM THE CROSSMEMBER, ADVERSELYAFFECTING DIRECTIONAL STABILITY, WHICH COULD RESULT IN AN ACCIDENT.
INSTALL ATTACHMENT REINFORCEMENT BRACKETS TO PREVENT CONTROL ARM DETACHMENT AS A RESULT OF CORROSION WEAKENING.
89V052000 · 500,000 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 1983 dodge 600 recalls
DRIVERS SEAT FRAME MAY EXPERIENCE FATIGUE FAILURE AT ONE (FRONT/OUTBOARD) OF ITS FOUR ATTACHMENTS.
THIS COULD RESULT IN SOME FORWARD, BACKWARD OR LATERALMOVEMENT OF SEAT, CREATING A POTENTIAL FOR LOSS OF CONTROL OF THE VEHICLEWHICH COULD RESULT IN AN ACCIDENT
REPLACE DRIVERS SEAT FRAME WITH A STRENGHTENED VERSION; ALSO, REINFORCE POWER ADJUSTER FRONT CROSSMEMBER TO INCREASE RIGIDITY OF SEAT ATTACHMENT SYSTEM.
89V011000 · 60,000 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 1985 dodge 600 recalls
On certain vehicles, the crossmember can become abnormally corroded at the lower control arm attachment. This could result in lower control arm separation and loss of vehicle control. Correction: crossmembers will be inspected and replaced if corrosion is excessive. Remainder will have crossmember retaining brackets installed.
1988172 · 163,146 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 1983 dodge 600 recalls
VEHICLES EQUIPPED WITH POWER SEATS THAT HAVE HAD A SEAT CUSHION FRAME REPLACEMENT IN THE FIELD COULD EXPERIENCE CUSHION FRAME FAILURE RESULTING IN SIGNIFICANT REARWARD MOVEMENT OF THE SEAT BACK. THIS COULD RESULT IN LOSS OF VEHICLE CONTROL AND A POSSIBLE CRASH. CORRECTION: SEAT CUSHION FRAME WILL BE INSPECTED AND REPLACED IF REQUIRED.
1988135 · 9 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 1986 dodge 600 recalls
On certain vehicles with 2.2 Litre turbo-charged multi-port fuel injection engines, there is a possibility that fuel leakage may occur during low ambient temperature operation at the fuel hose used to interconnect the fuel pressure regulator and the injector rail. Fuel leakage would create the potential for an engine compartment fire. Correction: the pressure regulator will be relocated and the fuel supply hose will replaced with a formed hose having a revised routing configuration.
1988091 · 44,731 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 1987 dodge 600 recalls
FUEL LEAKAGE MAY OCCUR IN LOW AMBIENT TEMPERATURE OPERATION AT CONNECTIONS OF AN ENGINE COMPARTMENT FUEL SUPPLY HOSE TO THE PRESSURE REGULATOR AND TO THE FUEL RAIL.
IN THE PRESENCE OF AN IGNITION SOURCE, FUEL LEAKAGE COULDRESULT IN A FIRE.
RELOCATE PRESSURE REGULATOR; REPLACE FUEL SUPPLY WITH FORMED HOSE WITH REVISED ROUTING CONFIGURATION TO ENSURE SEALING INTEGRITY.
88V105000 · 580,000 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 1987 dodge 600 recalls
A SERVICE REPLACEMENT DRIVERS SEAT CUSHION (MANUAL SEAT TYPE) MAY CONTAIN WRONG CUSHION WITH A BRACE THAT COULD INTERFERE WITH POWER SEAT ADJUSTER MECHANISM AND CAUSE STRESS ON THE FRAME.
SEAT FRAME COULD FRACTURE AND RESULT IN SIGNIFICANTREARWARD MOVEMENT OF THE SEAT BACK.
REPLACE FRAME WITH PROPER POWER SEAT FRAME.
88V061000 · 1,500 units in campaign · NHTSA
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 1986 dodge 600 recalls
THESE VEHICLES DO NOT COMPLY WITH C.M.V.S.S. 1103 - EXHAUST EMISSIONS. PLUGGED CHOKE VACUUM DELAY VALVE. NOTE: VEHICLES EQUIPPED WITH 2.2 LITRE CARBURETED ENGINES.
1987001 · 68,025 units in campaign · Transport Canada
Applies only if the manufacturer confirms your VIN · repair by an authorised dealer · All 1986 dodge 600 recalls
1–10 of 23